Steam Turbine Stationary Blades and Nozzles
Stationary Blades and Nozzles : The first set of nozzle fan an impulse turbine is the control set and is
Read MoreStationary Blades and Nozzles : The first set of nozzle fan an impulse turbine is the control set and is
Read MoreTURBINE BLADES : The efficiency of the turbine depends more than anything else on the design of the turbine blades
Read MoreTURBINE COUPLINGS : The purpose of couplings is to transmit power from the prime mover to the driven piece of
Read MoreTurbine Seals: Blade Seals : The efficiency of reaction turbines depends to a large extent on the blade seals. Radial,
Read MoreTurbine Bearings : Journal Bearing: The bearing for small turbines are often self – aligning spherical ball or roller bearings
Read MoreTurbine parts: Turbine casing : Casing or cylinders are of the horizontal split type this is not ideal as the
Read MoreTypes of Turbines : Condensing Turbines : With the condensing turbine, the steam exhausts to the condenser and the latent
Read MoreIn order to reduce steam velocity and blade velocity. The following methods may be used: Pressure Compounding Velocity Compounding
Read MoreSpecial Aspects of Reaction Turbine : There is a difference in pressure across the moving blades the steam will,
Read MoreOperation principles: Impulse Turbine : In principle, the impulse steam Turbine consists of a casing containing stationary steam nozzles and
Read MoreINTRODUCTION : Heat engines and prime movers the stream turbine is nearest to the ideal and of is widely used
Read MoreTECHNOLOGY [1,2,3,4]: In transverse tensile test if the break was in the weld metal, the sample would be : Acceptable
Read MoreAPPLICATION & CONTROL OF PRE-HEAT: CEV is used to determine pre heat. Check the pre heat [including tack weld]: before
Read More